Set-Ups

If you have a set-up you would like to share here's the place...

Setups used at the Uk Nationals 2008

Click here for Uk Nationals 2008 setup spreadsheet

Example 1 - Razz Fazz - Mono 1
Item	Make	Model	Info
Hull	Nimrif Models	Razz Fazz	C of G 200mm from transom. R2R weight 1250g
Motor	Mega	ACn 22-20-2	2875kv 6 pole 2 wind 540S
Cells	Thunder Power	Pro Lite V2	3S1P – 3,900mAh @ 11.1V - 20C - 276 g
ESC	Schulze	Fut-val-12-60-eW	60A water cooled, auto timing
Drive Line	Astec	0.13in flexi	In 7/32in allumimium tube
Hardware	ETTI	4mm Strut Set	Offset 5mm to right
Coupling	Octura	Flex Hex	1/8th inch to 0.013 inch
Propellor	Octura	X432	32mm x 1.4pitch, tapped M4
Radio	Spektrum	DX6i 2.4GHz	Hi-Tec HS-502-WG Metal gear rudder servo

	Nimrif Models Razz Fazz in action with the opposition getting a little too close. Yeahhhhh! eat my spray for a change TG.
	View showing own make ally angle turn fin. Started @ 70mm long cut to 45mm to reduce drag but the boat is twitchy so 50mm is probably optimum.
	Stern view showing ETTI 4mm Strut set, Octura X432 prop and flood chamber exit.
	Razz Fazz internal layout. Drive line off-set by 5mm right of c/l. Own fit flood chamber top vents showing. M4 screws holding about 70g of lead to make it self-right. The Li-poly pack goes left of c/l forward of motor on Velcro.

Example 1 - Zardoz Max - Mono 1
Item	Make	Model	Info
Hull	Lindenau	Zardoz Max	CofG 28% R2R 1200g
Motor	NEU	1115 1.5D	3850kv 4 pole 480L
Cells	A123 LiFePO4	ANR 26650M1	3S2P = 4600mAh @ 9V
ESC	ETTI	Navy 90	2deg timing 16kHz PWM
Drive Line	Astec	0.13in flexi	In 5/32in brass tube
Hardware	Astec	Hughey Strut & Rudder	Offset 5mm to right
Coupling	Octura	Flex Hex	1/8th inch to 0.013 inch
Propellor	Graupner	2318.34.5	34.5mm x 48.3mm Carbon
Radio	Futaba	3GR 2.4GHz	SD200 rudder servo

Example Mono 1 Setup Pictures and Video